Biblio

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Dossena V.  2012.  Optimization of a High-Pressure Steam Turbine Stage for a Wide Flow Coefficient Range. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. 6: Oil and Gas Applications; Concentrating Solar Power Plants; Steam Turbines; Wind Energy:615-625.

Becciani M, Bianchini A, Checcucci M, Ferrari L, De Luca M, Marmorini L, Arnone A, Ferrara G.  2017.  A Pre-Design Model to Estimate the Effect of Variable Inlet Guide Vanes on the Performance Map of a Centrifugal Compressor for Automotive Applications. 13th International Conference on Engines & Vehicles.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2013.  Predicting High-Lift Low-Pressure Turbine Cascades Flows Using Transition-Sensitive Turbulence Closures. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. 6B: Turbomachinery:V06BT37A039;13pages.

Ricci M, Pacciani R, Marconcini M, Arnone A.  2020.  Prediction of Tip Leakage Vortex Dynamics in an Axial Compressor Cascade Using RANS Analyses. ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. 2C: Turbomachinery:12.

Ameri AA, Arnone A.  1994.  Prediction of Turbine Blade Passage Heat Transfer Using a Zero and a Two–Equation Turbulence Model. ASME Turbo Expo.

Ameri AA, Arnone A.  1994.  Prediction of Turbine Blade Passage Heat Transfer Using a Zero and a Two–Equation Turbulence Model. ASME Turbo Expo.

Turkel E, Arnone A.  1993.  Pseudo-Compressibility Methods for the Incompressible Flow Equations. 11th AIAA CFD Conference.

Rubechini F, Giovannini M, Arnone A, Simoni D, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part I: Design in an Engine-Like Environment. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A020.

Giovannini M, Rubechini F, Amato G, Arnone A, Simoni D, Yepmo V, Satta F, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part II: Experimental Validation on Linear Cascades. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A021.

Giovannini M, Rubechini F, Amato G, Arnone A, Simoni D, Yepmo V, Satta F, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part II: Experimental Validation on Linear Cascades. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A021.

Ricci M, Pacciani R, Marconcini M, Mosele S G, Benvenuto M, Astrua P.  2021.  Retrofittable Solutions Capability for a Gas Turbine Compressor. 14th European Conference on Turbomachinery Fluid dynamics.

Agnolucci A, Marconcini M, Biliotti D, Toni L, Baroni A, Romani L, Arnone A.  2023.  Robust Design of a Vaned Diffuser in a Centrifugal Compressor Stage With a High Load Impeller. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition. 13D: Turbomachinery

Agnolucci A, Marconcini M, Biliotti D, Toni L, Baroni A, Romani L, Arnone A.  2023.  Robust Design of a Vaned Diffuser in a Centrifugal Compressor Stage With a High Load Impeller. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition. 13D: Turbomachinery

Giovannini M, Marconcini M, Rubechini F, Arnone A, Bertini F.  2015.  Scaling 3D Low-Pressure Turbine Blades for Low-Speed Testing. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2B: Turbomachinery

Mariotti F, Lilli L, Pinelli L, Arcangeli L, Maceli N, Brazzini F, Marconcini M, Arnone A.  2023.  Simulating Part-Span Snubber in Low Pressure Steam Turbine Rotor With Simplified Methods for Aerodynamic and Aeromechanical Assessment. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition. 10: Steam Turbine

Mariotti F, Lilli L, Pinelli L, Arcangeli L, Maceli N, Brazzini F, Marconcini M, Arnone A.  2023.  Simulating Part-Span Snubber in Low Pressure Steam Turbine Rotor With Simplified Methods for Aerodynamic and Aeromechanical Assessment. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition. 10: Steam Turbine

Bellucci J, Rubechini F, Arnone A.  2015.  Some Experiences About the Impact of Unsteadiness in Turbine Flows. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition.

Cozzi L, Rubechini F, Arnone A, Depalo S, Astrua P, Schneider A, Benvenuto M.  2020.  A State-of-the-Art CFD Setup for Axial Compressors: Details and Validation. ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. 2C: Turbomachinery:12.

Cozzi L, Rubechini F, Arnone A, Depalo S, Astrua P, Schneider A, Benvenuto M.  2020.  A State-of-the-Art CFD Setup for Axial Compressors: Details and Validation. ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. 2C: Turbomachinery:12.

Stecco SS, Arnone A, Michelotti A, Ursino P.  1989.  Study of Transonic Flow in an Annular Turbine Cascade Using the Computer Code TRAF2MG. 3rd International Symposium on Turbomachinery, Combined-Cycle Technologies and Cogeneration.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2010.  Sull'impiego del concetto di energia cinetica laminare per la previsione della transizione per separazione in profili high-lift per turbine aeronautiche di bassa pressione. 65o Congresso Nazionale ATI.

Arnone A, Benvenuti E, Corradini U, Stecco SS.  1992.  Theoretical and Experimental Investigation of Temperature Distribution in a Gas Turbine First Stage Nozzle. 6th International Conference on Gas Turbines in Cogeneration and Utility Industrial and Independent Power Generation - 1992 ASME COGEN-TURBO.

Ameri AA, Arnone A.  1991.  Three Dimensional Navier–Stokes Analysis of Turbine Passage Heat Transfer. 27th AIAA/SAE/ASME/ASEE Joint Propulsion Conference.

Ameri AA, Arnone A.  1991.  Three Dimensional Navier–Stokes Analysis of Turbine Passage Heat Transfer. 27th AIAA/SAE/ASME/ASEE Joint Propulsion Conference.

Arnone A, Benvenuti E.  1994.  Three–Dimensional Navier–Stokes Analysis of a Two–Stage Gas Turbine. ASME Turbo Expo.