Biblio

Marconcini M, Rubechini F, Arnone A, Ibaraki S.  2008.  Design and Off-Design Numerical Investigation of a Transonic Double-Splitter Centrifugal Compressor. ASME Turbo Expo. Conf. Proc. Vol. 6: Turbomachinery, Parts A and B, and C:1571–1578.

Fang Y, Rosenzweig M, Reissmann M, Pacciani R, Marconcini M, Bertini F, Sandberg R.  2025.  Data-Driven Enhancements to Transition and Turbulence Modeling Under Varying Pressure Gradients and Unsteadiness Effects. 15th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (ETMM15). :607-612.

Fang Y, Rosenzweig M, Reissmann M, Pacciani R, Marconcini M, Bertini F, Sandberg R.  2025.  Data-Driven Enhancements to Transition and Turbulence Modeling Under Varying Pressure Gradients and Unsteadiness Effects. 15th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (ETMM15). :607-612.

Pacciani R, Rubechini F, Arnone A, Lutum E.  2010.  Calculation of Steady and Periodic Unsteady Blade Surface Heat Transfer in Separated Transitional Flow. ASME Turbo Expo 2010: Power for Land, Sea, and Air. 4: Heat Transfer, Parts A and B:891-900.

Rubechini F, Schneider A, Arnone A, Daccà F, Canelli C, Garibaldi P.  2011.  Aerodynamic Redesigning of an Industrial Gas Turbine. ASME Turbo Expo. 7: Turbomachinery, Parts A, B, and C :1387-1394.

Marconcini M, Rubechini F, Arnone A, Scotti Del Greco A, Biagi R.  2012.  Aerodynamic Investigation of a High Pressure Ratio Turbo-Expander for Organic Rankine Cycle Applications. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. 8: Turbomachinery, Parts A, B, and C:847-856.

Boccini E, Meli E, Rindi AA, Pinelli L, Peruzzi L, Arnone A.  2018.  Towards structural topology optimization of rotor blisks. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 7A: Structures and Dynamics:pp.V07AT30A008;10pages.

Cozzi L, Rubechini F, Arnone A, Depalo S, Astrua P, Schneider A, Benvenuto M.  2020.  A State-of-the-Art CFD Setup for Axial Compressors: Details and Validation. ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. 2C: Turbomachinery:12.

Bellucci J, Rubechini F, Arnone A.  2015.  Some Experiences About the Impact of Unsteadiness in Turbine Flows. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition.

Giovannini M, Rubechini F, Marconcini M, Simoni D, Yepmo V, Bertini F.  2018.  Secondary Flows in LPT Cascades: Numerical and Experimental Investigation of the Impact of the Inner Part of the Boundary Layer. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 2B: Turbomachinery:pp.V02BT41A027;13pages.

Giovannini M, Marconcini M, Rubechini F, Arnone A, Bertini F.  2015.  Scaling 3D Low-Pressure Turbine Blades for Low-Speed Testing. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2B: Turbomachinery

Gambini E, Poli F, Rindi AA, Schipani C.  2005.  Robust Fluid-Solid Interfacing Algorithms with Application to Turbomachinery Aeroelastic Computations. 17th AIMeTA Congress of Theoretical and Applied Mechanics.

Agnolucci A, Marconcini M, Biliotti D, Toni L, Baroni A, Romani L, Arnone A.  2023.  Robust Design of a Vaned Diffuser in a Centrifugal Compressor Stage With a High Load Impeller. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition. 13D: Turbomachinery

Ricci M, Pacciani R, Marconcini M, Mosele S G, Benvenuto M, Astrua P.  2021.  Retrofittable Solutions Capability for a Gas Turbine Compressor. 14th European Conference on Turbomachinery Fluid dynamics.

Giovannini M, Rubechini F, Amato G, Arnone A, Simoni D, Yepmo V, Satta F, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part II: Experimental Validation on Linear Cascades. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A021.

Rubechini F, Giovannini M, Arnone A, Simoni D, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part I: Design in an Engine-Like Environment. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A020.

Ricci M, Pacciani R, Marconcini M, Arnone A.  2020.  Prediction of Tip Leakage Vortex Dynamics in an Axial Compressor Cascade Using RANS Analyses. ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. 2C: Turbomachinery:12.

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Dossena V.  2012.  Optimization of a High-Pressure Steam Turbine Stage for a Wide Flow Coefficient Range. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. 6: Oil and Gas Applications; Concentrating Solar Power Plants; Steam Turbines; Wind Energy:615-625.

Tani N, Rafanelli I, Pinelli L, Marconcini M.  2025.  Numerical Investigation of Low Engine Order Excitations on the Last Rotor Blade of Steam Turbines. ATI Annual Congress (ATI 2025). Journal of Physics: Conference Series, Volume 3143

Rosenzweig M, Kozul M, Sandberg R, Giannini G, Pacciani R, Marconcini M, Arnone A.  2025.  Numerical Design of Experiments for Repeating Low-Pressure Turbine Stages Part 1: Computational Opportunities and Methodology. ASME Turbo Expo 2025 Turbomachinery Technical Conference and Exposition. 11: Turbomachinery:V011T32A014.

Rosenzweig M, Kozul M, Sandberg R, Giannini G, Pacciani R, Marconcini M, Arnone A, Spano E, Bertini F.  2025.  Numerical Design of Experiments for Repeating Low-Pressure Turbine Stages Part 2: Effect of Reynolds Number on Different Blade Geometries. ASME Turbo Expo 2025 Turbomachinery Technical Conference and Exposition. 11: Turbomachinery:V011T32A024.

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Paradiso B, Gatti G.  2016.  Numerical and experimental investigation of axial gap variation in high pressure steam turbine stages. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines:V008T26A015;12pages.

Checcucci M, Schneider A, Marconcini M, Rubechini F, Arnone A, De Franco L, Coneri M.  2015.  A Novel Approach to Parametric Design of Centrifugal Pumps for a Wide Range of Specific Speeds. 12th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows.

Bellucci J, Rubechini F, Arnone A.  2018.  Modeling Partial Admission in Control Stages of Small Steam Turbines with CFD. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines:pp.V008T29A029;11pages.

Arnone A, Marconcini M, Rubechini F, Schneider A, Alba G.  2009.  Kaplan Turbine Performance Prediction Using CFD: an Artificial Neural Network Approach. HYDRO 2009 Conference Proceedings.