Biblio

Agnolucci A, Vanti F, Pinelli L, Arnone A.  2019.  Automatic Procedure for Aeromechanic Analysis of Turbomachinery Blade-Rows. 74TH ATI NATIONAL CONGRESS: Energy Conversion: Research, Innovation and Development for Industry and Territories. AIP Conference Proceedings vol. 2191:020003.

Agnolucci A, Vanti F, Pinelli L, Arnone A.  2019.  Automatic Procedure for Aeromechanic Analysis of Turbomachinery Blade-Rows. 74TH ATI NATIONAL CONGRESS: Energy Conversion: Research, Innovation and Development for Industry and Territories. AIP Conference Proceedings vol. 2191:020003.

Pacciani R, Rubechini F, Arnone A, Lutum E.  2010.  Calculation of Steady and Periodic Unsteady Blade Surface Heat Transfer in Separated Transitional Flow. ASME Turbo Expo 2010: Power for Land, Sea, and Air. 4: Heat Transfer, Parts A and B:891-900.

Arnone A, Bonaiuti D, Boncinelli P, Ermini M, Milani A, Baldassarre L, Camatti M.  2002.  CFD Applications to Industrial Centrifugal Compressor Design. ASME Turbo Expo. 5: Turbo Expo 2002, Parts A and B:639–648.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2010.  A CFD Study of Low Reynolds Number Flow in High Lift Cascades. ASME Turbo Expo. 7: Turbomachinery, Parts A, B and C:1525–1534.

Mosele S G, Garbarino T, Schneider A, Cozzi L, Arnone A, Goinis G, Hedkvist S.  2019.  Compressor Retrofittable Solutions in Heavy-Duty Gas Turbines for Minimum Environmental Load Reduction. SUPEHR19 SUstainable PolyEnergy generation and HaRvesting. 113

Bertini F, Ampellio E, Marconcini M, Giovannini M.  2013.  A Critical Numerical Review of Loss Correlation Models and Smith Diagram for Modern Low Pressure Turbine Stages. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. 6B: Turbomachinery:V06BT37A018-;14pages.

Marconcini M, Rubechini F, Arnone A, Ibaraki S.  2008.  Design and Off-Design Numerical Investigation of a Transonic Double-Splitter Centrifugal Compressor. ASME Turbo Expo. Conf. Proc. Vol. 6: Turbomachinery, Parts A and B, and C:1571–1578.

Bonaiuti D, Arnone A, Hah C, Hayami H.  2002.  Development of Secondary Flow Field in a Low Solidity Diffuser in a Transonic Centrifugal Compressor Stage. ASME Turbo Expo. 5: Turbo Expo 2002, Parts A and B:445–454.

Boncinelli P, Ermini M, Bartolacci S, Arnone A.  2007.  On Effects of Impeller-Diffuser Interaction in the "Radiver'' Centrifugal Compressor. ASME Turbo Expo. 6: Turbomachinery, Parts A and B:1039-1047.

Marconcini M, Bianchini A, Checcucci M, Biliotti D, Giachi M, Rubino D T, Arnone A, Ferrari L, Ferrara G.  2016.  Estimation of the Aerodynamic Force Induced by Vaneless Diffuser Rotating Stall in Centrifugal Compressor Stages. ATI 2016 - 71st Conference of the Italian Thermal Machines Engineering Association. Energy Procedia 101:734-741.

Giovannini M, Marconcini M, Arnone A, Bertini F.  2014.  Evaluation of Unsteady CFD Models Applied to the Analysis of a Transonic HP Turbine Stage. 10th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC 2013). :840-853.

Boncinelli P, Maceli N, Arnone A, Rossi E.  2004.  Geometrical Effects and Coolant Injection Impact on the Performance of an HP Transonic Heavy–Duty Turbine Stage. Conf. Proc. Vol. 5: Turbo Expo 2004, Parts A and B. :1447–1457.

Rubechini F, Marconcini M, Arnone A, Maritano M, Cecchi S.  2006.  The Impact of Gas Modeling in the Numerical Analysis of a Multistage Gas Turbine. ASME Turbo Expo 2006: Power for Land, Sea, and Air. 6: Turbomachinery, Parts A and B:531-539.

Vanti F, Agnolucci A, Pinelli L, Arnone A.  2019.  An Integrated Numerical Procedure for Flutter and Forced Response Assessment of Turbomachinery Blade-Rows. 13th European Conference on Turbomachinery Fluid dynamics & Thermodynamics ETC13.

Vanti F, Agnolucci A, Pinelli L, Arnone A.  2019.  An Integrated Numerical Procedure for Flutter and Forced Response Assessment of Turbomachinery Blade-Rows. 13th European Conference on Turbomachinery Fluid dynamics & Thermodynamics ETC13.

Pichler R, Zhao Y, Sandberg R, Michelassi V, Pacciani R, Marconcini M, Arnone A.  2018.  LES and RANS Analysis of the End-Wall Flow in a Linear LPT Cascade: Part I — Flow and Secondary Vorticity Fields Under Varying Inlet Condition. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 2B: Turbomachinery:pp.V02BT41A020;11pages.

Marconcini M, Pacciani R, Arnone A, Michelassi V, Pichler R, Zhao Y, Sandberg R.  2018.  LES and RANS analysis of the end-wall flow in a linear LPT cascade with variable inlet conditions, Part II: Loss generation. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 2B: Turbomachinery:pp.V02BT41A024;11pages.

Pinelli L, Poli F, Marconcini M, Arnone A, Schipani C, Spano E, Torzo D.  2011.  A Linearized Method for Tone Noise Generation and Propagation Analysis in a Multistage Contra-Rotating Turbine. 9th European Turbomachinery Conference (ETC9). :1253–1263.

Pinelli L, Arnone A, Peruzzi L, Bettini C, Finzel C, Kellerer R.  2023.  Mistuning Strategy on Long Blades to Mitigate Flutter. ASME Turbo Expo 2023 Turbomachinery Technical Conference and Exposition.

Marconcini M, Rubechini F, Arnone A, Ibaraki S.  2007.  Numerical Analysis of the Vaned Diffuser of a Transonic Centrifugal Compressor. ASME Turbo Expo 2007: Power for Land, Sea, and Air. 6: Turbo Expo 2007, Parts A and B:987-995.

Marconcini M, Rubechini F, Arnone A, Ibaraki S.  2006.  Numerical Investigation of a Transonic Centrifugal Compressor. ASME Turbo Expo 2006: Power for Land, Sea, and Air. 6: Turbomachinery, Parts A and B:1005-1012.

Arnone A, Marconcini M, Pacciani R, Schipani C, Spano E.  2001.  Numerical Investigation of Airfoil Clocking in a Three-Stage Low Pressure Turbine. ASME Turbo Expo 2001: Power for Land, Sea, and Air. 1: Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery:pp.V001T03A008;9pages.

Arnone A, Marconcini M, Scotti Del Greco A, Spano E.  2003.  Numerical Investigation of Three-Dimensional Clocking Effects in a Low Pressure Turbine. ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference. 6: Turbo Expo 2003, Parts A and B:245-254.

Arnone A, Pacciani R.  1996.  Numerical Investigation on Wake Shedding in a Turbine Rotor Blade. 15th International Conference on Numerical Methods in Fluid Dynamics. :358–363.