Biblio

Arnone A, Stecco SS.  1991.  Multigrid Calculation of Incompressible Flows for Turbomachinery Applications. XXIV International Associaton for Hydraulic Research Congress (AIRH).

Arnone A, Liou MS, Povinelli LA.  1993.  Multigrid Time-Accurate Integration of Navier–Stokes Equations. 11th AIAA CFD Conference.

Ameri AA, Arnone A.  1992.  Navier–Stokes Turbine Heat Transfer Predictions Using Two–Equation Turbulence Closures. 28th AIAA/SAE/ASME/ASEE Joint Propulsion Conference.

Checcucci M, Schneider A, Marconcini M, Rubechini F, Arnone A, De Franco L, Coneri M.  2015.  A Novel Approach to Parametric Design of Centrifugal Pumps for a Wide Range of Specific Speeds. 12th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows.

Peruzzi L, Bellucci J, Pinelli L, Arnone A, Arcangeli L, Cosi L, Mazzucco M.  2016.  Numerical aerodynamic damping evaluation of high-pressure steam turbine blades for aeromechanical characterization. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines:V008T26A012;10pages.

Bellucci J, Peruzzi L, Arnone A, Arcangeli L, Maceli N.  2019.  Numerical and Experimental Aerodynamic Investigation of Low Pressure Steam Turbine Module. ASME Turbo Expo 2019. Volume 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines:V008T29A024.

Pinelli L, Vanti F, Arnone A, Eret P, Tsymbalyuk V, Lo Balbo A A.  2018.  Numerical and Experimental Assessment of Flutter Stability in a Turbine Linear Cascade. 15th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines (ISUAAAT).

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Paradiso B, Gatti G.  2016.  Numerical and experimental investigation of axial gap variation in high pressure steam turbine stages. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines:V008T26A015;12pages.

Pinelli L, Poli F, Di Grazia E, Arnone A, Taddei F, De Lucia M, Torzo D.  2015.  Numerical and Experimental Study of the Tone Noise Generation By a Turbine Rear Frame. 22nd International Congress on Sound and Vibration, (ICSV22).

Arnone A, Pacciani R, Gebendinger M, Francini S.  1994.  Numerical Characterization of a Kaplan Turbine Using a Three-Dimensional Viscous Solver. Modelling, Testing & Monitoring for Hydro Powerplants Meeting, Hydropower & Dams.

Pinelli L, Poli F, Arnone A, Guérin S, Holewa A, Aparicio JRFernán, Puente R, Torzo D, Favre C, Gaetani P et al..  2015.  On the Numerical Evaluation of Tone Noise Emissions Generated by a Turbine Stage: an In-Depth Comparison Among Different Computational Methods. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2B: Turbomachinery

Pinelli L, Mariotti F, Arnone A, Marconcini M, Arcangeli L, Ciuchicchi L, Maceli N.  2022.  Numerical Investigation of Potential Flow Induced Vibrations of Steam Turbine Last Stage Rotor at Low Load Operation – Part 1: Sensitivity to Flutter Occurrence. ASME Turbo Expo 2022 Turbomachinery Technical Conference and Exposition.

Arnone A, Pacciani R.  1997.  Numerical Prediction of Trailing Edge Wake Shedding. ASME Turbo Expo.

Arnone A, Marconcini M, Pacciani R, Spano E.  1999.  Numerical Prediction of Wake–Induced Transition in a Low Pressure Turbine. 14th ISABE Symposium.

Steinthorsson E, Liou MS, Povinelli LA, Arnone A.  1993.  Numerical Simulation of Three-Dimensional Laminar Flow Over a Backward Facing Step; Flow Near Side Walls. ASME Fluids Engineering Division Conference, Symposium on Separated Flows. 149:19-26.

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Dossena V.  2012.  Optimization of a High-Pressure Steam Turbine Stage for a Wide Flow Coefficient Range. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. 6: Oil and Gas Applications; Concentrating Solar Power Plants; Steam Turbines; Wind Energy:615-625.

Becciani M, Bianchini A, Checcucci M, Ferrari L, De Luca M, Marmorini L, Arnone A, Ferrara G.  2017.  A Pre-Design Model to Estimate the Effect of Variable Inlet Guide Vanes on the Performance Map of a Centrifugal Compressor for Automotive Applications. 13th International Conference on Engines & Vehicles.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2013.  Predicting High-Lift Low-Pressure Turbine Cascades Flows Using Transition-Sensitive Turbulence Closures. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. 6B: Turbomachinery:V06BT37A039;13pages.

Ricci M, Pacciani R, Marconcini M, Arnone A.  2020.  Prediction of Tip Leakage Vortex Dynamics in an Axial Compressor Cascade Using RANS Analyses. ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. 2C: Turbomachinery:12.

Ameri AA, Arnone A.  1994.  Prediction of Turbine Blade Passage Heat Transfer Using a Zero and a Two–Equation Turbulence Model. ASME Turbo Expo.

Turkel E, Arnone A.  1993.  Pseudo-Compressibility Methods for the Incompressible Flow Equations. 11th AIAA CFD Conference.

Rubechini F, Giovannini M, Arnone A, Simoni D, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part I: Design in an Engine-Like Environment. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A020.

Giovannini M, Rubechini F, Amato G, Arnone A, Simoni D, Yepmo V, Satta F, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines With Blade Fences. Part II: Experimental Validation on Linear Cascades. ASME Turbo Expo 2019. Volume 2B: Turbomachinery:V02BT40A021.

Giovannini M, Marconcini M, Rubechini F, Arnone A, Bertini F.  2015.  Scaling 3D Low-Pressure Turbine Blades for Low-Speed Testing. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2B: Turbomachinery

Bellucci J, Rubechini F, Arnone A.  2015.  Some Experiences About the Impact of Unsteadiness in Turbine Flows. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition.