Aeromechanical Characterization of a Last Stage Steam Blade at Low Load Operation: Part 2 – Computational Modelling and Comparison

TitleAeromechanical Characterization of a Last Stage Steam Blade at Low Load Operation: Part 2 – Computational Modelling and Comparison
Publication TypeConference Paper
Year of Publication2020
AuthorsPinelli L, Vanti F, Peruzzi L, Arnone A, Bessone A, Bettini C, Guida R, Marrè Bruneghi M, Sláma V
Conference NameASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition
Date Published06/2020
PublisherASME
Conference LocationVirtual Event, September 21-25, 2020
Abstract

This paper is part of a two-part publication that aims to experimentally and numerically evaluate the aerodynamic and mechanical damping of a last stage ST blade at low load oper-ation. A three-stage downscaled steam turbine with a snub-bered last stage moving blade LSMB has been tested in the T10MW test facility of Doosan Skoda Power R&D Department in the context of the FLEXTURBINE European project (Flexi-ble Fossil Power Plants for the Future Energy Market through new and advanced Turbine Technologies).

Aerodynamic and flutter simulations of different low load conditions have been performed. The acquired data are used to validate the unsteady CFD approach for the prediction of the aerodynamic damping in terms of logarithmic decrement. Numerical results have been achieved through an upgraded version of the URANS CFD solver, selecting appropriate and robust numerical setups for the simulation of very low load conditions, such as increased condenser pressure at the exhaust hood outlet.

The numerical methods for blade aerodamping estimation are based on the computation of the unsteady pressure response caused by the row vibration. They are usually classified in time-linearized, harmonic balance and non-linear approaches both in frequency and time domain. The validation of all these methods historically started in the field of aeronautical low-pressure turbines and has been gradually extended to compressor blades and steam turbine rows.

For the analysis of a steam turbine last rotor blade operating at strong part load conditions, non-linear methods are recom-mended as these approaches are able to deal with strong non-linear phenomena such as shock waves and massive flow separations inside the domain.

Experimental data have been used to separate the contribu-tions of mechanical and aerodynamic damping, extrapolating to zero mass flow the total measured damping.

Finally, the comparisons between the aerodynamic damping coming from measurements and CFD results have been reported in order to highlight the capability to properly predict the last stage blade flutter stability at low load conditions. Such comparisons confirms the flutter free design of the new snubbered LSMB blade.

 

Reseach Notes

GT2020-15409

Refereed DesignationRefereed