Biblio

Gatti G, Gaetani P, Paradiso B, Dossena V, Arcangeli L, Maceli N, Bellucci J.  2016.  An Experimental Study of the Aerodynamic Forcing Function in a 1.5 Steam Turbine Stage. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines:V008T26A020;9pages.

Maceli N, Arcangeli L, Arnone A.  2021.  Two Phase Flow CFD Modeling of a Steam Turbine Low Pressure Section: Comparison With Data and Correlations. ASME Turbo Expo 2021 Turbomachinery Technical Conference and Exposition. 8: Oil and Gas Applications; Steam Turbine

Arnone A, Bertini F, Cecchi S, Maretto L.  2001.  Aerodynamic Optimization of the Meridional Channel Contouring in Steam Turbine Stages. 4th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics.

Rubechini F, Marconcini M, Arnone A, Cecchi S, Daccà F.  2007.  Some Aspects of CFD Modeling in the Analysis of a Low-Pressure Steam Turbine. ASME Turbo Expo. 6: Turbomachinery, Parts A and B:519–526.

Rubechini F, Schneider A, Arnone A, Cecchi S, Malavasi F.  2011.  A Redesign Strategy to Improve the Efficiency of a 17-Stage Steam Turbine. ASME Journal of Turbomachinery. 134(3):031021.

Bellucci J, Rubechini F, Marconcini M, Arnone A, Arcangeli L, Maceli N, Dossena V.  2015.  The Influence of Roughness on a High-Pressure Steam Turbine Stage: an Experimental and Numerical Study. ASME Journal of Engineering for Gas Turbines and Power. 137(1):1-9.

Sláma V, Rudas B, Eret P, Tsymbalyuk V, Ira J, Macalka A, Pinelli L, Vanti F, Arnone A, Lo Balbo A A.  2018.  Experimental and Numerical Study of Controlled Flutter Testing in a Linear Turbine Blade Cascade. Acta Polytechnica CTU Proceedings. Vol 20 Turbomachines 2018:98-107.

Marconcini M, Rubechini F, Arnone A, Ibaraki S.  2008.  Numerical Investigation of a Transonic Centrifugal Compressor. ASME Journal of Turbomachinery. 130(1):011010.

Marconcini M, Rubechini F, Arnone A, Ibaraki S.  2008.  Design and Off-Design Numerical Investigation of a Transonic Double-Splitter Centrifugal Compressor. ASME Turbo Expo. Conf. Proc. Vol. 6: Turbomachinery, Parts A and B, and C:1571–1578.

Savio P, Scionti A, Vitali G, Viviani P, Vercellino C, Terzo O, Nguyen H-N, Magarielli D, Spano E, Marconcini M et al..  2023.  Accelerating Legacy Applications with Spatial Computing Devices. Journal of Supercomputing. 79:7461–7483.

Becciani M, Bianchini A, Checcucci M, Ferrari L, De Luca M, Marmorini L, Arnone A, Ferrara G.  2017.  A Pre-Design Model to Estimate the Effect of Variable Inlet Guide Vanes on the Performance Map of a Centrifugal Compressor for Automotive Applications. 13th International Conference on Engines & Vehicles.

Rubechini F, Marconcini M, Arnone A, Cecchi S, Daccà F.  2007.  Some Aspects of CFD Modeling in the Analysis of a Low-Pressure Steam Turbine. ASME Turbo Expo. 6: Turbomachinery, Parts A and B:519–526.

Pacciani R, Marconcini M, Bertini F.  2009.  Assessment of an Intermittency Based Approach to Separated Flow Transition Predictions in Low-Reynolds Number High-Lift Cascade Flow. 8th European Turbomachinery Conference (ETC8). :141-151.

Pacciani R, Rubechini F, Arnone A, Lutum E.  2012.  Calculation of Steady and Periodic Unsteady Blade Surface Heat Transfer in Separated Transitional Flow. ASME Journal of Turbomachinery. 134(6):061037.

Marconcini M, Rubechini F, Pacciani R, Arnone A, Bertini F.  2012.  Redesign of High-Lift Low Pressure Turbine Airfoils For Low Speed Testing. ASME Journal of Turbomachinery. 134(5):051017.

Marconcini M, Pacciani R, Arnone A.  2010.  URANS Predictions of the Effects of Synthetic Jets on the Separated, Transitional Flow Over a Low-Pressure-Turbine-Like Flat Plate. ASME Turbo Expo. 7: Turbomachinery, Parts A, B and C:2605–2613.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2010.  Sull'impiego del concetto di energia cinetica laminare per la previsione della transizione per separazione in profili high-lift per turbine aeronautiche di bassa pressione. 65o Congresso Nazionale ATI.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2011.  An Assessment of the Laminar Kinetic Energy Concept for the Prediction of High-Lift, Low-Reynolds Number Cascade Flows. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 225(7):995-1003.

Pacciani R, Marconcini M, Arnone A, Bertini F.  2014.  Predicting High-Lift Low-Pressure Turbine Cascades Flows Using Transition-Sensitive Turbulence Closures. ASME Journal of Turbomachinery. 136(5):051007.

Marconcini M, Pacciani R, Arnone A.  2015.  Transition Modelling Implications in the CFD Analysis of a Turbine Nozzle Vane Cascade Tested Over a Range of Mach and Reynolds Numbers. Journal of Thermal Science. 24(6):526-534.

Ricci M, Pacciani R, Marconcini M, Arnone A.  2018.  Secondary flow and radial mixing modelling for CFD-based Through-Flow method: an axial turbine application. ATI 2018 - 73rd Conference of the Italian Thermal Machines Engineering Association. Energy Procedia 148:218-225.

Pacciani R, Marconcini M, Arnone A.  2019.  Comparison of the AUSM+-up and Other Advection Schemes for Turbomachinery Applications. Shock Waves. 29(5):705-716.

Marconcini M, Pacciani R, Arnone A, Michelassi V, Pichler R, Zhao Y, Sandberg R.  2019.  Large Eddy Simulation and RANS Analysis of the End-Wall Flow in a Linear Low-Pressure-Turbine Cascade - Part II: Loss Generation. ASME Journal of Turbomachinery. 141(5):051004(9pages).

Pichler R, Zhao Y, Sandberg R, Michelassi V, Pacciani R, Marconcini M, Arnone A.  2019.  Large-Eddy Simulation and RANS Analysis of the End-Wall Flow in a Linear Low-Pressure Turbine Cascade, Part I: Flow and Secondary Vorticity Fields Under Varying Inlet Condition. ASME Journal of Turbomachinery. 141(12):121005(10pages).

Giovannini M, Rubechini F, Marconcini M, Arnone A, Bertini F.  2019.  Reducing Secondary Flow Losses in Low-Pressure Turbines: The “Snaked” Blade. Int. J. Turbomach. Propuls. Power. 4(3):28.